PP pleated filter cartridge
Pleated PTFE cartridges are used for sterile filtration of gases. These cartridges also provide excellent chemical compatibility in solvent and aggressive chemical filtration applications.
PP pleated filter cartridges
- High flow rate with low pressure drop
- High Dirt holding capacity
- Long Service Life
- High Strength and Pressure Resistance.
- Reduced Fiber migration
- Broad Chemical Compatibility
- No chemical additives to contaminate filtrate.
Directives and standardization |
|
Product validation |
Bossmanfilter, the filter elements built into them and filter accessories are tested and the quality are monitored according to ASME and different ISO test standards |
The development, manufacture and assembly of Bossmanfilter industrial filters and filter elements is carried out within the framework of a certified quality management system in accordance with ISO 9001:2000.
PP pleated filter cartridges
Pharmaceutical IndustryWashing Machine , R.O. Pre "“ Filtration , Small Volume& Large Volume Parental |
Color & Dyes IndustryR.O. Pre "“ Filtration , Dyes Filtration , Color Filtration |
Chemical IndustryChemical , Solvent , Water Filtration |
Water Treatment IndustryPre "“ Treatment for R.O. , Mineral Water Plant , Resin trap |
Textile industryPre "“ Treatment for R.O. , Production water |
Plating |
| Directives and standardization | |
|---|---|
Product validation |
Bossmanfilter, the filter elements built into them and filter accessories are tested and the quality are monitored according to ASME and different ISO test standards |
The development, manufacture and assembly of Bossmanfilter industrial filters and filter elements is carried out within the framework of a certified quality management system in accordance with ISO 9001:2000.
Specifications
PP pleated filter cartridges
| Product Name | PP pleated filter cartridge |
|---|---|
|
Brand |
Bossmanfilter |
| Applications | ◼Sterile process gases ◼Venting ◼Fine chemicals ◼Solvents◼Photoresists |
| Materials | ◼Filter membrane: Hydrophobic PTFE membrane ◼Support & drainage layer: Polypropylene ◼Core, cage & end fittings: Polypropylene (Optional reinforced PP end caps for sterilisation |
|
Gaskets & O-Rings |
Ethylene Propylene , FEP encapsulated, Silicone, Viton |
| Media grades | S = Standard grade P = Integrity test grade |
| Micron ratings | 0.1, 0.2, 0.45, 1M |
| Available lengths | Standard cartridge: 5", 10", 20", 30", 40",(124/143, 256, 503, 750, 997mm)Junior cartridge: 2", 5", (64, 122mm) |
| Outer diameter | Standard cartridge: 68.50mm , Junior cartridge: 56mm |
| Effective filtration area | Standard cartridge: 0.75m2 per 254mm ( 10"), Junior cartridge: 0.25m2 per 122mm ( 5") |
| Max. operating temperature | 60℃ (Short term use 80℃ ) |
| Sterilisation | Steam or autoclave: 135℃ for 30mins (150 cycles) Hot water sanitisation: 90℃ for 30mins |
| Material compliance | FDA approved components USP Class VI-121Deg.C Plastics Test BSE/TSE |
| Directives and standardization | |
|---|---|
Product validation |
Bossmanfilter, the filter elements built into them and filter accessories are tested and the quality are monitored according to ASME and different ISO test standards |
The development, manufacture and assembly of Bossmanfilter industrial filters and filter elements is carried out within the framework of a certified quality management system in accordance with ISO 9001:2000.
